PEEK-ROD SIZE
| Φ MM |
| PEEK-Resin | PEEK-ESD | PEEK-GF30 |
公差
MM
Tolerance | 密度
KG/M³
Density | 重量
KG/M
Weight | 密度
KG/M³
Density | 重量
KG/M
Weight | 密度
KG/M³
Density | 重量
KG/M
Weight |
| 6 | +0.4 -+0.8 | 1.3 | 0.05 | 1.4 | 0.05 | 1.51 | 0.06 |
| 8 | +0.5-+0.9 | 1.3 | 0.08 | 1.4 | 0.09 | 1.51 | 0.095 |
| 10 | +0.4-+1.3 | 1.3 | 0.13 | 1.4 | 0.14 | 1.51 | 0.15 |
| 12 | +0.3-+1 | 1.3 | 0.17 | 1.4 | 0.19 | 1.51 | 0.21 |
| 15 | +0.6 -+1 | 1.3 | 0.26 | 1.4 | 0.27 | 1.51 | 0.29 |
| 16 | +0.3-+1 | 1.3 | 0.3 | 1.4 | 0.32 | 1.51 | 0.35 |
| 20 | +0.3-+1 | 1.3 | 0.45 | 1.4 | 0.48 | 1.51 | 0.52 |
| 22 | +0.4 -+1 | 1.3 | 0.55 | 1.4 | 0.59 | 1.51 | 0.64 |
| 25 | +0.2-+1 | 1.3 | 0.7 | 1.4 | 0.76 | 1.51 | 0.82 |
| 30 | +0.2 -+0.8 | 1.3 | 0.99 | 1.4 | 1.07 | 1.51 | 1.14 |
| 35 | +0.3-+1 | 1.3 | 1.29 | 1.4 | 1.4 | 1.51 | 1.51 |
| 40 | +0.4 -+1.4 | 1.3 | 1.78 | 1.4 | 1.92 | 1.51 | 2.07 |
| 45 | +0.8-+1.5 | 1.3 | 2.25 | 1.4 | 2.42 | 1.51 | 2.61 |
| 50 | +0.5-+1.5 | 1.3 | 2.71 | 1.4 | 2.92 | 1.51 | 3.14 |
| 55 | +0.5-+0.8 | 1.3 | 3.21 | 1.4 | 3.45 | 1.51 | 3.72 |
| 60 | +0.5-+1.5 | 1.3 | 3.87 | 1.4 | 4.17 | 1.51 | 4.49 |
| 65 | +2 | 1.3 | 4.67 | 1.4 | 5.03 | 1.51 | 5.43 |
| 70 | +0.4 -+0.6 | 1.3 | 5.31 | 1.4 | 5.72 | 1.51 | 6.16 |
| 75 | +0.3-+2.3 | 1.3 | 6.06 | 1.4 | 6.52 | 1.51 | 7.04 |
| 80 | +0.6-+1.5 | 1.3 | 6.92 | 1.4 | 7.44 | 1.51 | 8.03 |
| 85 | +0.5-+1.7 | 1.3 | 7.73 | 1.4 | 8.32 | 1.51 | 8.98 |
| 90 | +0.5-+1.5 | 1.3 | 8.71 | 1.4 | 9.38 | 1.51 | 10.1 |
| 100 | +0.5-+2 | 1.3 | 10.8 | 1.4 | 11.7 | 1.51 | 12.5 |
| 110 | +0.8-+3.5 | 1.3 | 12.8 |
|
|
|
|
| 120 | +0.8-+3.5 | 1.3 | 15.5 |
|
|
|
|
| 130 | +0.5-+2 | 1.3 | 18.1 |
|
|
|
|
| 140 | +0.5-+3 | 1.3 | 20.7 |
|
|
|
|
| 150 | +1 -+4 | 1.3 | 24.1 |
|
|
|
|
| 180 | +1.2 -+5 | 1.3 | 34.5 |
|
|
|
|
| 200 | +1.3-+5.5 | 1.3 | 42.9 |
|
|
|
|
Larger and smaller sizes are also available, please feel free to contact us
Why don't produce big size PEEK rod( diameter bigger than 200mm)
In fact, we also produce peek rods with a diameter greater than 200mm, but they are not a common size, so the inventory may be limited.
And we can design extrusion molds to meet users' requirements for large-sized PEEK rods.
Difficulties in producing large-sized PEEK rod:
After adding fibers, the melt fluidity of PEEK material is significantly reduced, which makes it difficult for the material to uniformly fill various parts of large-sized molds during injection molding or extrusion, leading to insufficient filling or defects.
In large-sized products, the distribution and orientation of fibers are difficult to control uniformly, which may lead to insufficient local strength or inconsistent performance.
