| viscosity: | |
|---|---|
| melt index: | |
| Color: | |
PEEK-660CA30
PRES
After reinforced by carbon fiber, the melt viscosity of PEEK will increase and its flowability will decrease.
When we producing products with complex structures or thin-walled features, it may lead to product defects.
Insufficient thin-walled filling:
PEEK material has a low melt flow rate (MFR) and poor flowability, making it difficult to quickly fill the thin-walled areas of the mold during injection molding, which may lead to problems such as missing glue, short shot, or surface shrinkage marks in the product.
Loss of complex structural details:
For products with fine grooves, tiny holes, or complex geometric shapes, low fluidity may result in incomplete shaping of local areas, affecting structural accuracy and functional implementation.
But PEEK-660CA30 can solve these problems.
660G is a high flow PEEK resin,which melt index can reach 80g/10min.
Use 660G to reinforced with carbon fiber . We Can get high flow carbon fiber reinforced PEEK-660CA30 , and the melt index can still reach 27g/10min.
PEEK granules is 25kg/bag,but we can We can provide samples you need(1-25KG).
for the shipping,we can ship by sea,by air and express delivery,it is all door to door.
UPS
Fedex
DHL
A:we have PEEK-990CA30,PEEK-880CA30,Their main difference is the different liquidity.
A:
What is the flowability of each carbon fiber reinforced PEEK?
PEEK-660CA30 has the highest liquidity, 880CA30 has moderate liquidity, and 990CA30 has the lowest liquidity
